CSE - PREFAB FRAMES AND SYSTEMS

CADSOLID -

ENGINEERING

Continuous "Under Construction" engineering for a sustainable better world

Entrepreneurship in  problem solving to fit-for-purpose solid solutions


" Everything should be made as simple as possible, but not simplier." - Albert Einstein

SURFACE TO IN-SEAM MINING [SIS-M] TECHNIQUE

[ALSO KNOWN AS "HIGH-WALL-MINING" (HWM)]

Copyright 2019 and IP CadSolid-Engineering all rights reserved

CHAIN-CONVEYOR BASEFRAME T4 [CC-BF-T4]

P/N: CSE-211-5148_DR6.1  [Design Review 6.1] With;

- (2) Sump Cylinder Rod-Mounting Yoke Bracket Frames

- (2) PushBeam Blocking System Frames + Option Hooks & Hydro-Actuators for Steep Mining

- (4) Access-Ladders

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Base Frame

TRACK-DRIVE-SYSTEM [TDS-T3]

P/N: CSE-220-67511_DR6.1 [Right-Hand Configuration]

P/N: CSE-220-67512_DR6.1 [Left-Hand Configuration]

With (per Column);

- (1) Cast-Column + (1) Keyd-Steer Bearing-Bushing + (1) Steer-Collar

- (1) Hydraulic-Lift Cylinder + (1) Yoke Top-Bearing with (2) High-Tension Rods

- (1) Complete Track-Roller Undercarriage +(1) Planetary Final-Drive + (1) Hydraulic-Motor

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Track Drive System

SUPPORT BEAM FRONT [SB-F-T2]

P/N: CSE-230-5200_DR6.1  [Design Review 6.1] With;

- (2) Front Anchor-Drill Mount Frames & Hydraulic-Valve Mounting Consoles

- (2) Track Drive System [TDS] Hydraulic-Actuated Steer-Cylinder Brackets

- (4) Lifting Lugs

- (1) Plow Hydraulic-Valve-Manifold Mounting-Bracket

- (4) Bronze-Bushings for Mounting TDS-Keyd-Steer Column-Bushings

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Super Beam Front
Super Beam Rear

SUPPORT BEAM REAR [SB-R-T2]

P/N: CSE-230-5400_DR6.1  [Design Review 6.1] With;

- (2) Track Drive System [TDS] Hydraulic-Actuated Steer-Cylinder Brackets

- (4) Lifting Lugs

- (4) Bronze-Bushings for Mounting TDS-Keyd-Steer Column-Bushings

- (2) Container Twist-Locks [BPM-Mount]

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Hose & Cable Chain Reel

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

HOSE-CABLE-CHAIN REEL [HR-T3]

P/N: CSE-240-60008_DR4.3  [Design Review 4.3] With;

- (1) 1200ft (366m) Single-Layer Storage Reel + (2) Hydraulic/Electric Naves + (1) Gear-Wheel

- (2) Reel/Stand Heavy-Duty Split-Bearings

- (2) Stand-Frame + Chain-Catching Frame + (2) Slewing Drive Mounts + Electric Swivel Frame

- (2) Lifting Lugs

- (2) Set-Off Mounting Console [SB-F Mount]

Note:

- Reel diameter can be folded, or partly removed on 4 opposite segment-sides for shipment-

  transport for proper fit on an flat-container and/or truck with or without half hose & cable chain

  storage


Pushbeam Transfer Mechanism T1

PUSHBEAM TRANSFER MECHANISM I [PTM-T1]

P/N: CSE-250-60101_DR6.1  [Design Review 6.1] With;

- (1) Sub-Baseframe +(2) Hydraulic Lift Cylinders

- (1) Lifting Table + (2) Pushbeam Centralize Brackets

- (1) Craddle Swing Frame + (1) Cradle Swing-Boom Frame + (2) Hydraulic Swing-Cylinders

- (1) Gripper Frame + (2) Hydraulic Gripper Cylinders


Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Pushbeam Transfer Mechanism T2

PUSHBEAM TRANSFER MECHANISM II [PTM-T2]

P/N: CSE-252-65001_DR6.1  [Design Review 6.1] With Quick-Pin Support-Beams Mounted;

- (1) Front Transfer Frame Platform + Railing & Kick-Boards + Safety Walk-Ways & Stair Steps

- (1) Rear Transfer Frame Platform + Railing & Kick-Boards + Safety Walk-Ways & Stair Steps

- (1) Traverse-Synchro Mechanism + (4) Overhead-Crane Trolleys + (2) Hydro-Travel Cylinders

- (1) Lift-Synchro Mechanism & Lift Frame + (1) Hydro-Lift Cylinder + (16) Lift-Synchro-Rollers

- (1) Lift-Craddle Frame + (1) Gripper Frame with (2) Hydro-Gripper Cylinders

- (2) Transfer Crossbridges + Railing & Kick-Boards + Safety Walk-Ways + High-Tension Rods

- (4) Transfer Frame Columns with Baseframe Welding Lugs & Pins

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Powerhead CC-T5

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Powerhead VA-T5

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Vertical Auger T5
Vertical Auger T5

VERTICAL AUGER [VA-T5] RH-DISCHARGE CONFIGURATION

P/N: CSE-311-67064_DR6.2  [Design Review 6.2] With Electric Motor & Gear-Reducer Inline-Drive;

- (1) Double-Auger with Bottom-Bearing Cartridge

- (1) Vertical-Auger-Tube with Doghouse & Belt-Discharge Mounts

- (2) Mandoors & LH+RH Cylinder-Swing-Brakets

- (1) Inline-Drive-Bearing-Cartridge + Coupling House

- (1) Gear-Reducer + Water/Glycol Cooling-House + Coupling House

- (1) Electric-Motor-Mount-Base-Flange + (1) Oil-Expansion Tank


Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

POWERHEAD [PH-T5] VERTICAL AUGER-DISCHARGE CONFIGURATION

P/N: CSE-311-60015_DR6.1  [Design Review 6.1] With Universal Latching Systems;

- (2) Corner Hook-Latching + Hook-Blocking-Cylinder Mount

- (2) Side Pin-Latching + Pin-Blocking-Cylinder Mount + PB-Push-Off-Bar Mount

- (2) Heavy-Duty Sump-Cylinder-Bracket + Rear-End Easy-Cylinder-Rest

- (1) Inline-Drive-Cartridge + (2) Cushion-Block-Bearing Mount + (2) Gear-Reducer-Mount- Flange + (2) Radial-Bearing-Mount-Flange + (1) Hydraulic-Manifold-Mount

- (1) Closed Bottom-Cover-Plate

- (1) Vertical-Auger-Discharge Frame

- (2) Electric-Motor-Mount-Base-Frame + (2) Hose & Cable Chain Ductwork-Mount

- (1) Electric & Data Enclosure-Mount-Frame + (divers mounting-brackets)

- (4) Lifting-Lugs


POWERHEAD [PH-T5] CHAIN-CONVEYOR GRAVITY-DISCHARGE CONFIGURATION

P/N: CSE-310-650015_DR6.1  [Design Review 6.1] With Universal Latching Systems;

- (2) Corner Hook-Latching + Hook-Blocking-Cylinder Mount

- (2) Side Pin-Latching + Pin-Blocking-Cylinder Mount + PB-Push-Off-Bar Mount

- (2) Heavy-Duty Sump-Cylinder-Bracket + Rear-End Easy-Cylinder-Rest

- (1) Inline-Drive-Cartridge + (2) Cushion-Block-Bearing Mount + (2) Gear-Reducer-Mount- Flange + (2) Radial-Bearing-Mount-Flange + (1) Hydraulic-Manifold-Mount

- (1) Bottom-Chain-Discharge-Cover-Plate

- (1) Top-Cover-Plate + (1) Mandoor-Cover-Plate + (1) Cover-Bar prepared for Options

- (2) Optional Heavy-Duty-Bell-House for extended optimum 3-points inline bearing distance

- (2) Electric-Motor-Mount-Base-Frame + (2) Hose & Cable Chain Ductwork-Mount

- (1) Electric & Data Enclosure-Mount-Frame + (divers mounting-brackets)

- (4) Lifting-Lugs



Vertical Auger T5
Vertical Auger T5

VERTICAL AUGER [VA-T5] RH-DISCHARGE CONFIGURATION

P/N: CSE-311-67603_DR6.1a  [Design Review 6.1a] With Hydraulic Direct-Drive LSHT-Motor;

- (1) Double-Auger with Bottom-Bearing Cartridge

- (1) Vertical-Auger-Tube with Doghouse & Belt-Discharge Mounts

- (2) Mandoors & LH+RH Cylinder-Swing-Brakets

- (1) Inline-Drive-Bearing-Cartridge + Coupling House

- (1) Hydraulic-Motor-Mount-Base-Flange


Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

SCREWCONVEYOR | PUSHBEAM [PB-T3]

P/N: CSE-320-50003_DR6.1  [Design Review 6.1] With Hook Latching System;

- (2) Corners with Hook-Latching + Drop-In Blocking-Pins + Center-Pins + Push-Interfaces

- (2) Corners with Hook-Lifting-Lugs + Center-Pin-Holes + Push-Interfaces

- (2) Hose & Cable Chain Inlay Channels

- (2) Screw-Conveyors LH & RH with Hanging-Pedestal-Bearings

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Push Beam T3
Push Beam T4

SCREWCONVEYOR | PUSHBEAM [PB-T4]

P/N: CSE-320-67173_DR6.1  [Design Review 6.1] With Pin Latching System;

- (2) Corners with Center-Pins + Push-Interfaces

- (2) Corners with Center-Pin-Holes + Push-Interfaces

- (4) Side-Pockets with (2) Latching-Pins and Pulling-Brackets

- (2) Hose & Cable Chain Inlay Channels

- (2) Screw-Conveyors LH & RH with Hanging-Pedestal-Bearings

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Push Beam T5 & T6

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

SCREWCONVEYOR | PUSHBEAM [PB-T6] (New-Container-Frame Type)

P/N: CSE-322-5000_DR6.3  [Design Review 6.3] Retrofit all PB-Types and Cross-Over all Latching Systems;

- (2) Corners with Center-Pins + Push-Interfaces

- (2) Corners with Center-Pin-Holes + Push-Interfaces

- (2) Hose & Cable Chain Inlay Channels

- (4) Optional Mount Pockets forTandem-Wheels

- (2) Optional Mount all types Screw-Conveyors LH & RH with Hanging-Pedestal-Bearings

- (2) Optional Mount high performance Screw-Conveyors LH & RH with non-obstruction bearing flow and continuous pitch flyers, power savings ~49% for Steep & Deep Directional Mining operations


Push Beam T6

SCREWCONVEYOR | PUSHBEAM [PB-T6] (New-Universal Container-Frame Type)

P/N: CSE-322-6001_DR6.3  [Design Review 6.3] Retrofit and Cross-Over all Latching Systems and can Retrofit Tandem-Wheels for Steep & Deep Mining;

- (2) Corners with Center-Pins + Push-Interfaces

- (2) Corners with Center-Pin-Holes + Push-Interfaces

- (2) Hose & Cable Chain Inlay Channels

- (2) Retrofit all types Screw-Conveyors LH & RH with Hanging-Pedestal-Bearings

- (2) Retrofit high performance Screw-Conveyors LH & RH with no-obstruction bearing flow and continuous pitch flyers, power savings ~49% for Steep & Deep Directional Mining operations


Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Short Low Profile Cutterhead Module T6
Short Low Profile Cutterhead Module T6

SHORT LOW PROFILE CUTTERHEAD MODULE [SLPCM-T6] (Universal Latching Frame Type)

P/N: CSE-334-670006_DR6.1  [Design Review 6.1] Retrofit and Cross-Over all Latching Systems;

- (2) Corners with Center-Pins + Push-Interfaces

- (2) Corners with Center-Pin-Holes + Push-Interfaces

- (2) Hose & Cable Chain Inlay Channels

- (2) Retrofit all types Screw-Conveyors LH & RH with Hanging-Pedestal-Bearings

- (2) Retrofit high performance 150 kW (165 hp) Water-Cooled Motors + (2) Reducer-Gear-Box's + (2) Drive-Sprockets

- (2) Shear-Arm-Tensioners + (2) Hydraulic-Activated Shear-Cylinders

- (1) Cutter-Drum + (2) Bearings + (2) Mechanical-Seals + (1) Synchroon Shaft with (2) Tension-Arms + (2) Driven-Sprockets

- (2) Single-Linked Cutting-Chains


Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Low Profile Undercuttinghead Module T8
Low Profile Undercuttinghead Module T8

LOW PROFILE UNDERCUTTINGHEAD MODULE [LPUM-T8]

(Universal High-Performance Synchroon-Shear-Arm-Frame Upgrade Type)

P/N: CSE-335-670008_DR6.1  [Design Review 6.1] Retrofit all excisting LPCM and SLPCM Frames and Shear-Cylinder Systems;

- (2) Hydraulic-Power-Packs fit into excisting Reducer-Gear-Box's Spaces

- (1) Shear-Arm-Frame + (2) Integrated Hydraulic-Activated near-gauge Steer-Pads + (2) Hydraulic-Activated and Planetary-Driven Counter-Rotate Under-Cutting-Wheel's



Low Profile Undercuttinghead Module T8

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Low Profile Undercuttinghead Module T8
Low Profile Undercuttinghead Module T8

LOW PROFILE UNDERCUTTINGHEAD MODULE [LPUM-T8]

(Universal Latching Frame Type)

P/N: CSE-335-60008_DR6.1  [Design Review 6.1]

- (2) Corners with Center-Pins + Push-Interfaces

- (2) Corners with Center-Pin-Holes + Push-Interfaces

- (2) Hose & Cable Chain Inlay Channels 

- (2) 150 kW (165 hp) Electric-Hydraulic-Power-Packs

- (1) Hydraulic-Activated Shear-Arm-Frame + (2) Integrated Hydraulic-Activated near-gauge Steer-Pads + (2) Hydraulic-Activated and Planetary-Driven Counter-Rotate Under-Cutting-Wheel's

- (2) Counter Rotate Augers

OPTIONAL:

- Laser-Gyro for Horizontal Radius of Curvature (HRC) to Target Navigation and Vertical Radius of Curvatures (VRC) Survey Data

- Deep-Water Pressure-Seals

- Dewatering Pushbeam with (2) PC-Pumps, Water-Inflow Capacity 2x 10 l/sec

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Basic Power Module T3
Basic Power Module T3

BASIC POWER MODULE [BPM-T3]

(20 ft Container Sized with Twist-Corner Frame Type)

P/N: CSE-420-6000_DR4.2  [Design Review 4.2]

- (8) 20ft Twist-Lock-Corner ISO Configured

- (2) Sliding Doors with Pull-Out | Push-In Handles

- (2) Compartments for Electric Control Module [ECM] and Electric Hydraulic Powerpack [EHP]

- (4) ECM 1500 kW [2000 HP] Switch-Gear Panels, 995VAC/1560kW transformed to 440VAC

        to 220VAC and to PLC & Backup-UPS Power-Supply

- (1) EHP 224 kW [300HP] Electric-Motor-Driven Triple-Inline Hydraulic Pumps Unit

- (1) Hydraulic Open-Loop 2 Compartment Tank for Main-Pump 1, High-Flow-Pump 2 and

        General Service Pump 3

- (1) Continuously-Running Kidney-Filter Pump-Unit over Hydraulic-Tank Return-Filters-Intake

        compartment and Pumps-Intake compartment

- (1) Water-Glycol Closed-Loop Tank for Cooling Power-Head & Cutter-Head Motors

- (2) Water-Glycol Pump-Units, 1 for Power-Head Motors and 1 for Cutter-Head Motors

- (1) General-Service Air-Compressor-Unit Installed Outside the BPM/EHP Compartment

- (1) Air-Conditioner-Unit Installed Outside the BPM/ECM Compartment

- (2) Air-Filter-Ventilators Installed Outside the BPM to ECM and EHP compartments for over

       compression to keep the ambient mining-dust out

- (5) Fire extinguishers 2 on each side of the BPM 1 inside of ECM compartment and 2 inside

       EHP compartment

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Basic Power Module T3
Basic Power Module T3
Electric Power Module T6
Electric Power Module T6

ELECTRIC POWER MODULE [EPM-T6]

(21ft Container Sized with 20ft Twist-Corner Frame Type)

P/N: CSE-470-60016_DR6.1  [Design Review 6.1]

- (8) 20ft Twist-Lock-Corner ISO Configured Container with underfloor Fuel-Tank Compartmernt

- (7) Access Doors with Safety Inside Un-Lock & Open Kick-Pads

- (2) Compartments for Electric Power Module [EPM] Diesel-Genset, Hydraulic Power Unit

       [HPU] with Main-Cooling-Fan space and underfloor day-tank Fuel storage

- (1) EPM 1560 kW [2000 HP] Switch-Gear Panel, 995VAC/1560kW/60Hz

- (1) HPU 80 kW [107 HP] Engine PTO Double Hydraulic Under-Carriage Propel-Drive Pump

        Unit

- (1) Hydraulic Closed-Loop Tank for Propel-Drive Pump

- (2) Engine compartment Electric Air-Supply & Cooling-Fans

- (1) Hydraulic & Cooling Compartment Double Radiator with Expansion-Tanks

- (1) Optional "Piggy-Back" 80 kW [107 HP] Genset mounting frame

Note:

Any RAL Paint Color you like

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Electric Power Module T6
Electric Power Module T6
Electric Power Module T6
Electric Power Module T6
Operator Cabine T3
Operator Cabine T3

OPERATOR CABINE [CAB-T3]


P/N: CSE-490-57205_DR6.1  [Design Review 6.1]

- (1) FOP Safety Roof with Pick-Up Lifting Lugs

- (4) Shock-Absorber Foor-Mounts

- (9) Double-Tempered-Glass Windows

- (2) Access-Doors

- (2) PLC Touch-Screen Control-Desk's

- (1) Air-Conditioner / Heater

- (1) Fresh-Air Filter-Ventilator

- (1) Operator-Seat with Shock-Absorbers and Comfortable Adjustments

- (1) Foot-Rest Panel

- (1) GPS Navigation, WiFi Internet, CB Radio Communication

- (1) Generator Remote Control Enclosure

- (3) Bright Light Module, 2 at Front, 1 for Rear Stand-Mount

- (2) Walk-Way Bright Led Spot Bars and Single Led Spots

- (1) Private Locker Enclosure

- (1) Personal Ethernet (Internet) Laptop Connection

- (1) Fire Extinguisher

Note:

Any RAL Paint Color you like


Operator Cabine T3

Price On Request [POR]

- FOB

- CFR - To Port

- or Production-Drafts & Support

Operator Cabine T3
Operator Cabine T3

SURFACE TO IN-SOIL DRILLING [SIS-D] TECHNIQUE

[ALSO KNOWN AS "Horizontal Directional Drilling" (HDD)]

Copyright 2019 and IP CadSolid-Engineering all rights reserved

OEM&AM - NPI - CPI ARE THE METHODS WE USE TO DESIGN AND DO BETTER

[Click to Enlarge Images]

Copyright (c) 2014-2019, Author and Intellectual Properties: Cornelis W. in 't Hout

DUTCH OEM DESIGNS

UNDER CONSTRUCTIONS UNDER CONSTRUCTION UNDER CONSTRUCTION UNDER CONSTRUCTIONS

This website uses cookies. By continuing to use this site, you accept our use of cookies.

Accept